Minimum Computer Specification:
300 Mhz CPU (Minimum)
128 Mb SDRAM (Minimum)

What You Need:
1x Philips Head Screwdriver
1x DVD Recorder
1x IDE ATA 100 Cable
4x Fine Thread Screws
1x Audio Cable (Optional)



Step 1 Inserting the Drive
Insert the writer into the tower ensuring that the drive is flush with the other panels on the front
Fit fixing screws



Step 2 Setting The Jumpers
For optimal performance you must connect your drive as a master even if there is another device on that IDE channel



Step 3 Attaching The Cables
Attach the cables as shown



Power cable (Right) From PSU
IDE cable (Middle) From Motherboard
Audio Cable (Left) From Soundcard (Optional)

Step 4 Close The Case
Once all the cables are connected to the drive fit the side back on to the tower and begin Writing